Contents of accessories kit:

1 -Kevlar thread for latch for fin; 
2 - Latch for fin;
3 - Servo hach for elevator; 
4 - Forward wing mounting screws  М4х35(with one spare);
5 - Rear wing mounting screws М4х25(with one spare);
6 - Wrench for screws 2.5 mm;
7 - V-mount
8 - Nut for the horizontal stabilizer V-mount(with one spare);
9 - Wing servo hatches with fairings for bigger to the tail servos;
10 - Elevator pushrod;
11 - Wing control horn;
12,14,16 - Tip of screw (1 set);
13 - Rudder pushrod;
15 - Bowden big tip;
17 -Hatch with a fairing for rudder servo.

Contents of part Ava Pro RES EL kit:

1 - Central panel;
2 - Contents of accessories Ava Pro RES EL kit;
3 - Left wing tip;
4 - Right wing tip;
5 - Stabilizer;
6 - Vertical stabilizer;
7 - Fuselage;
8 - Tail boom.

Contents of part  Super Ava Pro RES ELkit:

1 - Central panel;
2 - Left wing tip;
3 - Right wing tip;
4 - Stabilizer;
5 - Vertical stabilizer;
6 - Fuselage;
7 - Tail boom;
8 - Contents of accessories Super Ava Pro RES EL kit.

Contents of accessories kit:

1 - Ailerons and flaps control horn (4 pcs);
2 - Rods of the flaps and ailerons М2.5 (4 pcs);
3 - Servo haches (4 pcs);
4 - Aileron and flap clevises 2.5 mm;
5 - Latch for fin and kevlar thread to its mounting;
6 - V-mount;
7 - Nut for the horizontal stabilizer V-mount(with one spare);
8 - Rudder control horn;
9,10 - Servo haches;
11,13 -  The pushrod with adapter and the screw (1 set);
12 - Bowden big tip;
14 - Elevator pushrod;
15 - Wrench for screws 2.5 mm;
16 - Rear wing mounting screws М4х25(with one spare);
17 - Forward wing mounting screws  М4х35(with one spare);
18 - Fin pushrod;
19 - Wing servo hatches with fairings for bigger to the tail servos.

Contents of accessories kit:

1 - Rudder control horn;
2 - Latch for fin;
3 - Tail clevise;
4 - Forward wing mounting screws  М4х35(with one spare);
5 - Rear wing mounting screws М4х25(with one spare);
6 - Nut for the horizontal stabilizer V-mount(with one spare);
7 - V-mount;
8 - Servo hach for rudder;
9 - Servo hach for spoiler;
10 -  Wing servo hatches with fairings for bigger to the tail servos;
11 - Fin pushrod;
12 - Elevator pushrod;
13 - Wrench for screws 2.5 mm;
14 - Kevlar thread for latch for fin;
15,16,19 - The pushrod with adapter and the screw (1 set);
17 - Bowden big tip;
18 - Flap pushrod;
20 - Servo hach.

Contents of part Ava Pro Flapped EL kit:

1 - Central panel;
2 - Contents of accessories Ava Pro Flapped EL kit;
3 - Left wing tip;
4 - Right wing tip;
5 - Stabilizer;
6 - Vertical stabilizer;
7 - Fuselage;
8 - Tail boom.

Wing

Новые законцовки крыла  AVA PRO EL существенно снизили сопротивление интерференции на краях модели.

Fuselage

A feature of this fuselage is that its shape is very close to the forms glider version, which ensures high aerodynamic performance and high accuracy of landing. It has a lighter weight and increased shoulder motor needed when using light electric motors

Canopy

 Canopy is made of carbon composite. . It uses reliable mounting latch design proven in many Vladimir’s Model planes: Blaster 2 EL, Sprite EL, Graphite 2 EL, Supra EL.

Stabilizer 

Our new CAD/CAM design and manufacturing processes resulted in extremely accurate built-up  horizontal stabilizer, which has  low aerodynamic drag. Also the stiffnes and sthrength of the stabilizer is increased due to the use of D-box from high strength IMS 65 carbon fabric.

Vertical stabilizer 

AVA PRO has a detachable vertical stabilizer, which can be removed to facilitate transportation. The stabilizer is fixed on the tail boom with a carbon pin. It is recommended to secure the pin with a piece of scotch tape before flying. The rudder of AVA PRO is of ultra light built-up defing.