BLASTER 3/SNIPE Ballast 60g

BLASTER 3/SNIPE Ballast 60g

Specially for you we make ballast for Blaster 3 weighing 60 grams. In the complete set you receive cargo on a textolite basis, a PP clamp and screw M3. All you need - is to connect the lock and load with duct tape in the area ...

Buy 18,00 €

Following your numerous requests we make ballast for Blaster 3 weighing 60 grams.

The set includes:

 1) Cargo on a textolite basis

 2) PP clamp

 3) Screw for fixing ballast M3

The acting pin on a clamp should get to one of apertures on cargo. The aperture needs to be chosen depending on position of the center of gravity of your model - ballast installation should not change it.

The collected ballast is simply inserted in front of a fuselage into a nasal emphasis on a beam. Insert it while the carving aperture in a ballast clamp will not coincide with an aperture on a nasal emphasis, and then fix screw M3 from the complete set.

With a weight of 60 grams of ballast wing load Blaster = 2.62 g/dm2

For flights to the dynamic flow you can use a heavy ballast BLASTER 3 Ballast 85g