• eng

  • побеждая гравитацию

    • cederic duss f3k eurotour champion

      Congratulations to Cederic Duss (SUI) – winner of F3K World Cup and CONTEST Eurotour 2017

    • joe wurts plus f5j


      PLUS is the F5J without any compromises

    • dominik prestele f3j eurotour champion

      Congratulations to Dominik Prestele (GER) - F3J CONTEST Eurotour winner 2017

    • shinto col de tende fai eurotour

         Congratulations to Sebastien Lanes (Shinto) - winner of the Col de Tende FAI eurotour and Pierre Rondel (Shinto) with 3rd place!

    • nikita sholom junior world champion 2016

      Congratulations to Nikita Sholom (UKR) - the new F3J Junior World Champion 2016.

    items
    0
    0
    add to cart
    Наверх

    snipesnlogoweb

      You can download a PDF file with templates for setting different flight phases (modes).

    pdflogoSnipe. Recommendations for assembly

    pdflogoSnipe ailerons settings template

    (NOTE: to print the file in the correct scale, the scale settings for printing, select "None").

    Options for equipment selection and placement to obtain the correct CG for Snipe SN


    snipe sn recommended

     

    Equipment arrangement (position number according to the picture) Equipment weight Nose ballast for CG 64 mm CG without ballast
     

    1

     

    2

     

    3

     

    4

     

    5

     

    6

     
    1  Receiver   JR 285MG
    (aileron) 
     JR 285MG
    (aileron) 
    JR 285MG
    (rudder)
     JR 285MG
    (rudder)
     Li-Po 600mAh   74 gr 0 gr 64 mm
    2  Li-Po 600mAh   JR 285MG
    (aileron) 
     JR 285MG
    (aileron) 
    D47
    (rudder)
     D47
    (elevator)
     Receiver   59,4 gr 0 gr 64 mm
    3  MKS DS75K
    (rudder) 
     MKS DS75K
    (elevator) 
     Li-Po 600mAh  JR 285MG
    (aileron)
     JR 285MG
    (aileron)
     Receiver   65 gr 0 gr 64 mm
    4  KST X08
    (rudder) 
     KST X08
    (elevator) 
     Li-Po 600mAh  JR 285MG
    (aileron)
     JR 285MG
    (aileron)
     Receiver   66 gr 0 gr 64 mm
    5  Li-Po 600mAh   KST X08
    (rudder) 
     KST X08
    (elevator) 
    JR 285MG
    (aileron)
     JR 285MG
    (aileron)
     Receiver   66 gr -1 gr (trimmed ballast holder) 63 mm
    6  Li-Po 600mAh   KST X08
    (aileron) 
     KST X08
    (aileron) 
    KST X08
    (rudder)
     KST X08
    (elevator)
     Receiver   58 gr 4 gr 67 mm
    7  Li-Po 600mAh   KST X08
    (aileron) 
     KST X08
    (aileron) 
    MKS DS75K
    (rudder)
     MKS DS75K
    (elevator)
     Receiver   57 gr 5 gr 68 mm
    8  Li-Po 600mAh   MKS DS75K
    (aileron) 
     MKS DS75K
    (aileron) 
    MKS DS75K
    (rudder)
     MKS DS75K
    (elevator)
     Receiver   56 gr 5.5 gr 70 mm
    9  Li-Po 600mAh   KST X08
    (aileron) 
     KST X08
    (aileron) 
    D47
    (rudder)
     D47
    (elevator)
     Receiver   51,4 gr 6 gr 72 mm


    Options for equipment selection and placement to obtain the correct CG for Snipe SNT


    snipe snt recommended

    Equipment arrangement (position number according to the picture) Equipment weight Nose ballast for CG 64 mm CG without ballast
     

    1

      

    2

      

    3

      

    4

      

    5

      

    6

     
    1 MKS DS75K
    (rudder)
    MKS DS75K
    (elevator)
    MKS DS75K
    (aileron)
    MKS DS75K
    (aileron)
    Receiver Li-Po 300mAh  45.5 gr 2 gr 65 mm
    2 KST X08
    (rudder)
    KST X08
    (elevator)
    KST X08
    (aileron)
    KST X08
    (aileron)
    Receiver Li-Po 300mAh  47.5 gr 4 gr 66 mm
    3 MKS DS75K
    (aileron)
    MKS DS75K
    (aileron)
    D47
    (rudder)
    D47
    (elevator)
    Receiver Li-Po 300mAh  39.9 gr 6 gr  68 mm
    4 KST X08
    (aileron)
    KST X08
    (aileron)
    D47
    (rudder)
    D47
    (elevator)
    Receiver Li-Po 300mAh  40.9 gr 7 gr 69 mm

     

     

    Parts weight
    JR 285MG 12 gr
    MKS DS75K 7.5 gr
    KST X08 8 gr
    Diamond D47 4.7 gr
    Receiver 5.5-6.5 gr
    Tail 12.8 gr
    Li-Po 600 mAh 20 gr
    Li-Po 300 mAh 9.5 gr

     

     


    mail preview save

    Contents of Snipе SN kit

    accessoires kit snipe snsnipe sn detalis kit

    Contents of accessories kit:

    1. 3m kevlar thread;

    2. Wing control horn;

    3. Launching peg;

    4. Ballast holder;

    5. Stabilizer control horn;

    6. Rudder control horn;

    7. Torsion spring;

    8. Screw for fixing PP clamp for ballast (M3);

    9. Screws for fixing stabilizer (2 pcs);

    10. Spare screws for fixing stabilizer  (2 pcs);

    11. Set of screws for fixing of the wing М3х6 и М3х10 (1 spare set);

    12. Pipes for the closing control cables;

    13. Wing horn shafts.



    Contents of part kit:

    1. Wing;

    2. Contents of accessoires Snipe kit;

    3. Aileron pushrods;

    4. Bowden tubes for pushrods;

    5. Reinforcement plates for aileron rods;

    6. Fuselage with nose cone;

    7. Stabilizer;

    8. Vertical stabilizer.

    Contents of Snipе SN/2 kit

    detalis kit snipe sn 2

    Contents of part kit:

    1. Wing;

    2. Contents of accessoires Snipe kit;

    3. Aileron pushrods;

    4. Bowden tubes for pushrods;

    5. Reinforcement plates for aileron rods;

    6. Fuselage with nose cone;

    7. Stabilizer;

    8. Vertical stabilizer.

    Snipe SN Technical Data


    Click on the model name to paint it

    SNIPE SN Light for right-handed

    SNIPE SN for right-handed

    SNIPE SN Strong for right-handed

    SNIPE SNTLight for left-handed

    Length

     1066 mm (41.96 inch)

    1021 mm (40.2 inch)

    Wing span

    1490 mm (58.66 inch)

    Wing area

    19.65 dm²  (304.6 sq in)

    Wing airfoils

    Proprietary airfloil family by Joe Wurtz

    Wing aspect ratio

    11,3

    Horizontal stabilizer area

    2,14 sq dm (33.17 sq in)

    Horizontal stabilizer airfoils

    Proprietary airfloil family by Joe Wurtz

    Horizontal stabilizer aspect ratio

    1,42

    Vertical stabilizer area

    2 sq dm (31 sq in)

    Vertical Stabilizer airfoils

    Proprietary airfloil family by Joe Wurtz

    Vertical stabilizer aspect ratio

    1,08

    Control surfaces

    Ailerons (flaps), rudder, elevator




    Weight characteristics Snipe SN


    Click on the model name to paint it

    SNIPE SN Light for right-handed

    SNIPE SN for right-handed

    SNIPE SN Strong for right-handed

    SNIPE SNTLight for left-handed

    Fuselage 

     32,4 gr ( 1,14 oz)

    30,4 gr ( 1,07 oz)

    Nose cone

     6,7 gr ( 0,24 oz)

    Aileron pushrod, reinforcement plates

      

    5.5 gr (0.19 oz)

    Wing

    91-98 gr (3.2 - 3.45 oz)

    101-110 gr (3.56 – 3.88 oz)

    115-125 gr (4.06 - 4.41 oz)

    91-98 gr (3.2 - 3.45 oz)

    Horizontal stabilizer

    5,5-6,2 gr (0.19 - 0.22 oz)

    Vertical stabilizer

    5,8 – 6,2 gr (0.2 - 0.22 oz)

    Details like screws, crevices

    4.5 gr (0.16 oz)

     

    NT model weight

    151.4-159.5 gr (5.34 - 5.63 oz) 

    161.4-171.5 gr (5.69 - 6.05 oz)    175.4-186.5 gr (6.19 - 6.58 oz) 149.4-157.5 gr (5.27 - 5.56 oz) 

     

    RTF weight 

    208.8-216.9 gr (7.36 - 7.65 oz)  

    placement of equipment №9

     226.4-236.5 gr (7.99 - 8.34 oz) 

    placement of equipment №3

    249.4-260.5 gr (8.8 - 9.19 oz)  

    placement of equipment №1

    195.3-203.4 gr (6.89 - 7.17 oz)  

    placement of equipment №3

    Wing loading

     10.62 - 11.04 gr\dm²

    11.52 - 12.03 gr\dm² 

     12.69 - 13.26 gr\dm²  9.94 - 10.35 gr\dm²

     

     

     Price, EUR

    for right-handed 

    612,00 € Buy  

    for right-handed 

    612,00 € Buy

    for right-handed 

    632,00 € Buy

    for right-handed  

    612,00 € Buy  

     for left-handed 

    612,00 € Buy

     for left-handed 

    612,00 € Buy

     for left-handed 

    632,00 € Buy

     for left-handed 

    612,00 € Buy




    Weight characteristics Snipe SN/2


    Click on the model name to paint it

    SNIPE SN /2 Light for right-handed

    SNIPE SN /2 for right-handed

    SNIPE SN /2 Strong for right-handed

    SNIPE SNT /2 Light for left-handed

    Wing

    96-103 gr (3.38 - 3.6 oz)

    106-115 gr (3.7 – 4.1 oz)

    120-130 gr (4.23 - 4.6 oz)

    96-103 gr (3.38 - 3.6 oz)

     

    NT model weight

    156.4-164.5 gr (5.51 - 5.8 oz) 

    166.4-176.5 gr (5.87 - 6.22 oz)    179.4-191.5 gr (6.33 - 6.75 oz) 154.4-162.5 gr (5.45 - 5.73 oz) 

     

    RTF weight 

    213.8-221.9 gr (7.54 - 7.83 oz)  

    placement of equipment №9

     231.4-241.5 gr (8.16 - 8.52 oz) 

    placement of equipment №3

    254.4-265.5 gr (8.97 - 9.36 oz)  

    placement of equipment №1

    200.3-208.4 gr (7.06 - 7.35 oz)  

    placement of equipment №3

    Wing loading

     10.88 - 11.29 gr\dm²

    11.77 - 12.3 gr\dm² 

     12.95 - 13.51 gr\dm²  10.2 - 10.6 gr\dm²

     

    Price, EUR

    for right-handed 

    680,00 € Buy

    for right-handed 

    680,00 € Buy

    for right-handed 

    680,00 € Buy

    for right-handed 

    680,00 €  Buy

     for left-handed 

    680,00 € Buy

     for left-handed 

    680,00 € Buy  

     for left-handed 

    680,00 € Buy

      for left-handed 

    680,00 € Buy


    snipe sn dlg assembly drawing previewsnipe snt dlg assembly drawing preview



    snipe sn lightsnipe snwingr

     

    Wing

    Joe Wurtz had worked for many years to obtain the perfect DLG wing aerodynamics and came to the conclusion that the use of thin profiles is needed, especially for the aileron part of the wing. Analysis of the traditional sandwich and even unitized constructions showed that such wing is not enough rigid and durable. Completely new solution was required.

    We managed to integrate the carbon I-web for the spar into the Rohacell core. The spar shear web significantly increased wing rigidity and protects the spardelamination during launch high loading. The other integrated shear web closes the aileron contour and makes a very thin aileron extremely rigid. Rohacell core is made with CNC precision. Wing skin is made of unique ultrathin carbon fabric Carboline 39 g/m ² provide light weight (about 104g), rigidity, strength and accuracy of the wing.

    For Snipe SN wing and tail we use the unique ultralight Rohacell, created by our individual order.

    The light weight wing version of Snipe SN Light will allow you to win in light wind and float conditions.

    The special feature of Snipe SN Light is the use of ultralight carbon fabric Carboline 26 g/m², providing the wing weight from 94g.

    The strong wing version of Snipe SN Strong provides a high powerful launch with a  ballast in windy conditions. Reinforcement wing longitudinal Carboline layers marginally increases the weight, but significantly increased the strength of the Snipe SN Strong wing. Additional aileron reinforcement counteracts flutter at high launch speed. (Snipe SN Strong wing weight is about 115g.)

    Snipe DLG flap construction

    Snipe SN wing construction

    1.     Ultralight Rohacell core;

    2, 4. Carbon spar cap;

    3.     Carboline spar shear web;

    5.     Aileron hinge tape;

    6,7.  Carboline skin layer

            Carboline_SC_39_2/45 — for Snipe SN;

            Carboline_SC_26_2/45 — for Snipe SN Light

            Carboline three layer custom preform — for Snipe SN Strong;

    8.     Lower strengthening of wing fitting;

    9.     Solid filler;

    10.   Upper strengthening of wing fitting;

    11.   The aileron shear web.

    Snipe DLG wing construktion

    snipe sn throwing peg new

     



    Throwing peg

    A significant advantage of Snipe SN is the easy high launch. Comfortable Snipe SN throwing peg provides precise location of your fingers during fast restarted.

    Please rewind the base of throwing peg by Kevlar thread to avoid peg delamination, like fig.

    snipe 2 1

     


    Snipe SN/2 and Snipe SNT/2

    High strength joiner and original construction of wing joint ensure the integrity of the wing when launch the glider with full power. Autoclav quring provide high strength of the wing joiner, which is produced of high-tech carbon prepreg. Two-parts-wing fitting added 5 grams to model weight only (near CG).

    We make two parts wing for Snipe SN/2 for right and left hander pilots. Tape joint before flight by both side of the wing.

     

     

    F3K Snipe DLG tail02Snipe DLG tail 0Snipe_2

     

     

    Tail

    The tail airfoils and shape was optimized by Joe Wurts for high launch altitude and perfect controllability.

    We produce two versions of fuselages: for left and right handed pilots with different slot for the vertical stabilizer. The Snipe vertical stabilizer is fitted to both this versions. Please pay attention during the assembly, the fin airfoil must fit to the slot profile (it is right fin position). The horizontal stabilizer with elevator has significantly increased rigidity of whole control system. The stabilizer is mounted on the pylon under the tail boom. This allows easy to use very light and backlash-free pool/spring control system.

    The tail skin is made of unique ultrathin carbon fabric Carboline 26 g/m ². In conjunction with the core of the unique ultra-light Rohacell, it provides light weight (about 12g for both stabilizers), rigidity, strength and accuracy of the tail.

    Vertical and horizontal stabilizers are finished completely. Rudder and elevator are hinged already by light Kevlar. Horns and torsion springs are included in the kit.




    Fuselage snipe_1snipe sn and snt 

    Fuselages Snipe SN & Snipe SNT

    Fuselages Snipe SN and Snipe SNT is a one part beam of prepreg made of the Carboline Combi preform basis. This light beam is not only takes momental and torsional flight loads but also it can withstand very tough landing.

    High strength rings with nuts for fixing the wing are bandage the fuselage beam evenly distributed the load. The servos, receiver and the battery are conveniently located on the beam under radio-transparent nose cowl made of Kevlar. It provides easy assembling, control and service. Ultralight aerodynamic carbon shroud shuts aileron pushrods & horns and provides low aerodynamic drag. The carbon pylon for stabilizer is firmly glued to the bottom of the fuselage beam and shuts the elevator horn.

    In order to fly in windy weather it is possible to install the ballast in front of the fuselage beam opening. The new fastener system allows quick installation and quick changing ballast. If you do not use the ballast, it is necessary to insert and fix the ballast holder to avoid the pressing in the nose cowl at this location under the tough landing.

    Fuselage Snipe SN is finished completely, rudder and elevator cables are installed. The kit is also contains aileron rods and all other details.

    For the light wing version for Snipe SNT Light we produce a fuselage with 45mm shorter tail boom.

    Fuselages Snipe SN and Snipe SNT are totally interchangeable and suitable to Snipe wings and tails.

    For the convenience of your choice, we have picked Snipe SN & Snipe SNT equipment with different power and weight. This arrangement equipment provides the CG correct position.

    10  Вид на кабанчики  snipe sn f3k dlg snt 13

    Snipe pull spring_system_2  snipe ballast holder 1  snipe sn ballast





    Please, pay attention, we produce two versions of Snipe fuselage. There are versions with fin slots for right-handed and left-handed pilots.

     

    snipe sn for lefthandersnipe sn for righthander


    f3k wc 2015 podium seniors team alex hewson snipe sn dlg f3k wc1   wc 2015 f3k in ludbreg 55

     

    The original Snipe, created by Joe Wurts in 2013, has been the world’s best discus launch glider since public release, winning more top level F3K competitions than any other model. This unique glider has the advantage in all phases of flight: very easy and high launch, quick climb rate in thermals, extremely low sink rate in dead air, as well as  an excellent glide ratio, even at higher speeds, giving good penetration when returning upwind.





    snipe sn green3


    The new Snipe SN with a 20mm shorter nose was made as an experiment for F3K World Championship 2015. Team New Zealand,  F3K World Champion 2015 Alex Hewson and some other top pilots used this modification during Championship to great effect.

     The Short Nose has these benefits:

    • Reduced moment of inertia. This reduces the initial yaw of the Snipe SN during launch, increasing launch altitude.
    • The reduced inertia also makes the Snipe more stable in turbulence or when circling, improving performance and controllability.
    • The Snipe is responds better to elevator input, reducing pilot workload.
    • When circling in a thermal, Snipe SN turns faster and due to its lower weight needs less bank angle, increasing the climb rate.

    Alex Hewson added the Snipe SN’s advantages to his own unique skills, to become F3K World Champion 2015. The New Zealand Snipe Team (Alex Hewson, Joe Wurts, Kevin Botherway) also placed first in the 2015 F3K World Championships.

    We produce three wing types for different flight condition: Snipe SN Light; Snipe SN; Snipe SN Strong for light, normal, and windy flight conditions.

    The new Snipe SN color scheme allows you to choose a unique Snipe that you will not confuse with other models, even when flying at a distance.


    snipe sn top 2jpg  snipe sn 2 pcs 2 snipe sn bottom


    Snipe SNT Light (short nose&tail) with 45 mm shorter tail boom.




    2 fuselages new


    We make two fuselages for the new Snipe, the Snipe SN (with a short nose, as described above), and the Snipe SNT with a short nose and tailboom. Each fuselage is available in versions for left and right handed throwers.

    The Snipe SNT feels solid and very stable cruising around, and light and lively in pitch when thermalling and manoeuvring. The plane is a bit more twitchy in yaw due to the lower yaw damping.

    With the shorter tailboom, the pilot’s input becomes more important, and more skill is required to get the best from this thoroughbred glider. The pitch characteristics are definitely better, the launch does not seem to be affected and may even be slightly improved, though by too small a difference to measure. The plane’s response in yaw from turbulence is the downside with a shorter tailboom, especially if mated with a heavy wing.  Once the air gets bumpy, then the increased inertia of the heavier wing makes the handling less pleasant. With a lighter wing, the shorter tailboom works well. That is why we recommend Snipe SNT for more advanced pilots, and with a light wing only

     

    fuselage 1 snipe tail 12 ballast3



    Snipe SN/2 and SNT/2 (two parts of the wing).



    snipe sn 2 box dimensions new

    Для удобства полетов на соревнования и комфортных поездок на автомобиле мы разработали специальную разборную версию крыла Snipe. Невероятная компактность Snipe SN/2 и Snipe SNT/2 позволяет брать модель с собой по всюду. Габаритные размеры ящика для модели в чехлах - всего 1080х230х60 мм. Обратите внимание, мы производим две версии разборного крыла - для right-handed and left-handed pilots.  

     

     

    Перед полетом обязательно проклейте стык крыла скотчем!



    snipe sn dlg assembly drawing preview

       

    snipe snt dlg assembly drawing preview

     

     

      Wing area: 19.65 dm²  (304.6 sq in)

      Wing aspect ratio: 7.58 % 

      Stabilizer area: 2,14 sq dm (33.17 sq in)

      Control surfaces: ailerons, rudder, elevator

      

      Full Snipe SN technical data is here.



    Options for equipment selection and placement to obtain the correct CG for Snipe SN


    snipe sn recommended

     

    Equipment arrangement (position number according to the picture) Equipment weight Nose ballast for CG 64 mm CG without ballast
     

    1

     

    2

     

    3

     

    4

     

    5

     

    6

     
    1  Receiver   JR 285MG
    (aileron) 
     JR 285MG
    (aileron) 
    JR 285MG
    (rudder)
     JR 285MG
    (rudder)
     Li-Po 600mAh   74 gr 0 gr 64 mm
    2  Li-Po 600mAh   JR 285MG
    (aileron) 
     JR 285MG
    (aileron) 
    D47
    (rudder)
     D47
    (elevator)
     Receiver   59,4 gr 0 gr 64 mm
    3  MKS DS75K
    (rudder) 
     MKS DS75K
    (elevator) 
     Li-Po 600mAh  JR 285MG
    (aileron)
     JR 285MG
    (aileron)
     Receiver   65 gr 0 gr 64 mm
    4  KST X08
    (rudder) 
     KST X08
    (elevator) 
     Li-Po 600mAh  JR 285MG
    (aileron)
     JR 285MG
    (aileron)
     Receiver   66 gr 0 gr 64 mm
    5  Li-Po 600mAh   KST X08
    (rudder) 
     KST X08
    (elevator) 
    JR 285MG
    (aileron)
     JR 285MG
    (aileron)
     Receiver   66 gr -1 gr (trimmed ballast holder) 63 mm
    6  Li-Po 600mAh   KST X08
    (aileron) 
     KST X08
    (aileron) 
    KST X08
    (rudder)
     KST X08
    (elevator)
     Receiver   58 gr 4 gr 67 mm
    7  Li-Po 600mAh   KST X08
    (aileron) 
     KST X08
    (aileron) 
    MKS DS75K
    (rudder)
     MKS DS75K
    (elevator)
     Receiver   57 gr 5 gr 68 mm
    8  Li-Po 600mAh   MKS DS75K
    (aileron) 
     MKS DS75K
    (aileron) 
    MKS DS75K
    (rudder)
     MKS DS75K
    (elevator)
     Receiver   56 gr 5.5 gr 70 mm
    9  Li-Po 600mAh   KST X08
    (aileron) 
     KST X08
    (aileron) 
    D47
    (rudder)
     D47
    (elevator)
     Receiver   51,4 gr 6 gr 72 mm


    Options for equipment selection and placement to obtain the correct CG for Snipe SNT


    snipe snt recommended

    Equipment arrangement (position number according to the picture) Equipment weight Nose ballast for CG 64 mm CG without ballast
     

    1

      

    2

      

    3

      

    4

      

    5

      

    6

     
    1 MKS DS75K
    (rudder)
    MKS DS75K
    (elevator)
    MKS DS75K
    (aileron)
    MKS DS75K
    (aileron)
    Receiver Li-Po 300mAh  45.5 gr 2 gr 65 mm
    2 KST X08
    (rudder)
    KST X08
    (elevator)
    KST X08
    (aileron)
    KST X08
    (aileron)
    Receiver Li-Po 300mAh  47.5 gr 4 gr 66 mm
    3 MKS DS75K
    (aileron)
    MKS DS75K
    (aileron)
    D47
    (rudder)
    D47
    (elevator)
    Receiver Li-Po 300mAh  39.9 gr 6 gr  68 mm
    4 KST X08
    (aileron)
    KST X08
    (aileron)
    D47
    (rudder)
    D47
    (elevator)
    Receiver Li-Po 300mAh  40.9 gr 7 gr 69 mm

     

     

    Parts weight
    JR 285MG 12 gr
    MKS DS75K 7.5 gr
    KST X08 8 gr
    Diamond D47 4.7 gr
    Receiver 5.5-6.5 gr
    Tail 12.8 gr
    Li-Po 600 mAh 20 gr
    Li-Po 300 mAh 9.5 gr