AVA PRO

Contents of accessories kit:
1 - Fuselage servo tray and rails;
2 - Wrench for screws 2.5 mm;
3 - Wing control horn;
4 - Attachment for the ballast tube;
5 - Tail clevise 2mm;
6 - V-mount
7 - Spare nut for the horizontal stabilizer V-mount(with one spare);
8 - Kevlar thread for latch for fin; 
9 - Sleeve for fixing ballast;
10 - Servo tray mounting screws;
11 - Latch for fin;
12 - Bowden big tip;
13 - Rear wing mounting screws М4х25(with one spare);
14 - Forward wing mounting screws  М4х35(with one spare);
15 - Adjustable towhook.

Contents of part kit Ava Pro RES:
1 - Tail feather  adapters;
2 - Bowden for tail feather  adapters;
3 - Central panel;
4 - Contents of Ava Pro RES kit;
5 - Right wing tip;
6 - Left wing tip;
7 - Stabilizer;
8 - Vertical stabilizer;
9 - Fuselage;
10 - Ballast pipe;
11 - Tail boom.


Contents of part kit Super Ava Pro RES:
1 - Tail feather  adapters;
2 - Bowden for tail feather  adapters;
3 - Central panel;
4 - Contents of Super Ava Pro RES kit;
5 - Right wing tip;
6 - Left wing tip;
7 - Stabilizer;
8 - Vertical stabilizer;
9 - Fuselage;
10 - Ballast pipe;
11 - Tail boom.

Contents of accessories kit:

1 - Ailerons and flaps control horn (4 pcs);
2 - Rods of the flaps and ailerons М2.5 (4 pcs);
3 - Aileron and flap clevises 2.5 mm;
4 - Attachment for the ballast tube;
5 - Kevlar thread for latch for fin;
6 - V-mount;
7 - Nut for the horizontal stabilizer V-mount(with one spare);
8 - Latch for fin;
9 - Wrench for screws 2.5 mm;
10 - Adjustable towhook;
11 - Sleeve for fixing ballast;
12 - Tail clevise 2mm;
13 - Rear wing mounting screws М4х25(with one spare);
14 - Bowden big tip;
15 - Forward wing mounting screws  М4х35(with one spare);
16 - Servo tray mounting screws;
17 - Fuselage servo tray and rails;
18 - Servo haches (4 pcs).

Contents of accessories kit:

1 - Fuselage servo tray and rails;
2 - Wrench for screws 2.5 mm;
3 - Rudder control horn;
4 - Attachment for the ballast tube;
5 - Tail clevise 2mm;
6 -  V-mount
7 - Kevlar thread for latch for fin; 
8 - Nut for the horizontal stabilizer V-mount(with one spare);
9 - Hatch with a fairing for spoiler servo;
10 - Latch for fin;
11 - Bowden big tip;
12 - Rear wing mounting screws М4х25(with one spare);
13 - Forward wing mounting screws  М4х35(with one spare);
14 - Sleeve for fixing ballast;
15 - Adjustable towhook;
16 - Rods of the flaps;
17 - Servo tray mounting screws;
18 - Fin clevises 2.5mm.

Contents of part Ava Pro Flapped kit:

1 - Tail feather  adapters;
2 - Bowden for tail feather  adapters;
3 - Central panel;
4 - Contents of Ava Pro Flapped kit ;
5 - Left wing tip;
6 - Right wing tip;
7 - Stabilizer;
8 - Vertical stabilizer;
9 - Fuselage;
10 - Ballast pipe;
11 - Tail boom.

Wing

Новые законцовки крыла  AVA PRO EL существенно снизили сопротивление интерференции на краях модели.

Fuselage 

In fuselage Ava PRO satisfies a number of contradictory requirements:

1) The glider does not slide after landing but stops as soon as the nose touches the ground. The shape of the pod tip satisfies F3J requirements;

2) The fuselage has minimal aerodynamic drag, thanks to the wing raised on a pylon and streamlined pod outline with CFD optimized cross-sections;

3) The shape of the fuselage also ensures increased stiffness and strength, required for violent landings. 

Canopy

 Canopy is made of carbon composite. . It uses reliable mounting latch design proven in many Vladimir’s Model planes: Blaster 2 EL, Sprite EL, Graphite 2 EL, Supra EL.

Tow hook

Our trademark adjustable tow hook allows for launch optimization for any weather or C.G. location in the recommended range.

Stabilizer 

Our new CAD/CAM design and manufacturing processes resulted in extremely accurate built-up  horizontal stabilizer, which has  low aerodynamic drag. Also the stiffnes and sthrength of the stabilizer is increased due to the use of D-box from high strength IMS 65 carbon fabric.

Vertical stabilizer 

AVA PRO has a detachable vertical stabilizer, which can be removed to facilitate transportation. The stabilizer is fixed on the tail boom with a carbon pin. It is recommended to secure the pin with a piece of scotch tape before flying. The rudder of AVA PRO is of ultra light built-up defing.