Shinto Expert top paint #1:

-  Top: color

-  Nose cone: color

-  Fuselage: white/black

 Shinto Expert top paint #2:

-  Top wings: color

-  Central panel: white/black

-  Nose cone: color

-  Fuselage: white/black

 Shinto Expert top paint #3:

-  Nose cone: color

-  Fuselage: white/black

-  Top wings: white/black

-  Central panel: color

 Shinto Expert bottom paint #1:

- Bottom wings: color

- Central panel: white/black

 Shinto Expert bottom paint #2:

-  Bottom wing: white/black

-  Strip: color

 Shinto Expert bottom paint #3:

-  Bottom wing: white/black

-  Strip: color

Contents of part kit:

1. Shinto Expert right wing;

2. Shinto Expert left wing;

3. Shinto Expert right stabilizer;

4. Shinto Expert left stabilizer;

5. Shinto Expert fuselage;

6. Shinto Expert nose ballast 100g;

7. Shinto Expert 6 degree wing Joiner;

8. Shinto Expert Nose Cone;

9. Contest of accessoires Shinto Expert kit.

Contents of accessoires kit: 

1. Shinto Expert tail hatch;

2. Wires for connect the receiver to the wing connectors;

3. Tail clevises;

4. Tail ball pushrod adapters;

5. Couplers M2 for carbon rod;

6. Servohatch sticker;

7. Flat wing servo hatches.

Shinto Expert F & T wing construction

1. Outer layer of Carboline 75 2/45 with D-box reinforced on the front part;

2. The wing back shear web;

3. The inner layer Carboline 75 2/45;

4. The flap hinge;

5. The flap shear web;

6. The sandwich material;

7. The spar bottom cap of high modulus carbon fiber;

8. The spar top cap of high modulus carbon fiber;

9. High-strength epoxy glue for the sparr;

10. Main spar shear web of balsa plywood with direction ±45 degree;

11. Main spar shear web of Carboline 39 2/45;

12. The wing ballast box.

     

     

     

    Shinto Expert J wing

    Shinto Expert J wing is optimized for lightest strong version. Wing weight without servo frame is 400 g only

    Shinto Expert J has no ballast pocket in the wing. 550 g of the ballast can be placed in the wing joiner only.

Shinto Expert J/B/F/T new 6 degree wing joiner  

1. Joiner caps of high-strength carbon (for F3F);

2. Joiner shear web with ballast box of carbon braids;

3. Joiner vertical caps of high-strength carbon perceive shock during landing.

Shinto wing joiner is made of carbon prepreg in the steel mold with high pressure and temperature 130C.

Wing joiner weighs 117 grams. Wing joiner has additional ballast cameras for mounting 670 g of the ballast.

Shinto Expert J light 6 degree wing joiner 

Additionally you can purchase Shinto Expert J light wing joiner for thermal soaring flight without ballast. It is 55 g lighter than regular joiner, though the ballast pocket is not provided.

Use Shinto Expert J light wing joiner for Shinto Expert J version only.

Shinto Expert Fuselage

F

You can order tow hook installation, if you plan use line for launch.

Shinto Expert fuselage tail boom construction

1. Outer and inner layers of Carboline 75 2/45 perceive the torsional loads of the V-tail;

2. Outer and inner layers of Carboline 75 2/45 perceive the torsional loads of the V-tail;

3. The longitudinal layers of high modulus carbon fiber provide high stiffness of the fuselage.

V-tail horn hatch of carbon is ready completely. It is necessary to fix it by adhesive tape on the fuselage.

The semitransparent Shinto canopy is made of plastic. The logo of Shinto and VM is not just sparkling in the sun, but it is the reinforcement rib also. The ribs provide secure fit of the canopy to the fuselage by the clips.

Shinto and Shinto fuselage set are equipped with nose ballast. Weight of nose ballast is about 100g.

Shinto Expert V-tail

Shinto