Contents of accessories kit:

1. Wing joiners with an angle of 5°;

2. Wing joiners with an angle of 2,5°;

3. Wing joiners with an angle of 0°;

4. Wires for connect the receiver to the wing connectors;

5. Wing servo hatches with fairings for servo horns;

6. Servo tray mounting screws;

7. Fuselage servo tray and rails;

8. Top surface fairings for flaps and aileron pushrods;

9. Forward wing mounting screws  М4х40(with one spare);

10. Rear wing mounting screws М4х30(with one spare);

11. Wrench for screws 2.5 mm;

12. Ballast holding screw М4х16;

13. Couplers M2 for carbon rod;

14. Flap pushrods М2х50;

15. Aileron pushrods М2х30;

16. Aileron, flap and tail clevises М2;

17. Ailerons and flaps control horns;

18. Fin control horn;

19. Stabilizer fixing screws М3х8 (2 pcs spare);

20. Control horns stabilizer fixing screws М2х10(2 pcs spare).

Contents of part kit:

1. Right wing tip;

2. Left wing tip;

3. Fuselage;

4. Тail boom;

5. Central panel;

6. Stabilizer;

7. Vertical stabilizer;

8. Contents of Supra Expert accessoires kit.

Supra Expert SC central wing section

1. Outer layers of Carboline SC_39_2/45 with direction ±45 degree;

2. Herex core of the composite sandwich;

3. Inner layers of Carboline SC_39_2/30 with direction ±30 degree;

4. 10,5 mm wide spar of high strength IMS65 carbon fiber;

5. Rohacell flap core;

6. Трубчатый лонжерон закрылка из карбонового чулка несёт крутящие нагрузки;

7. Strip of the hinge material;

8. The rear wall of the wing is of Rohacell with Carboline SC_39_2/45.

Supra Expert Hard SC and Supra Expert Hard SC molded rudder central wing section

1. Outer layers of Carboline SC_39_2/45 with direction ±45 degree;

2. Herex core of the composite sandwich;

3. Inner layers of Carboline SC_39_2/30 with direction ±30 degree;

4. 13 mm wide spar of high strength IMS65 carbon fiber;

5. Rohacell flap core;

6. Трубчатый лонжерон закрылка из карбонового чулка несёт крутящие нагрузки;

7. Strip of the hinge material;

8. The rear wall of the wing is of Rohacell with Carboline SC_39_2/45.

Supra Expert Glass central wing section

1. Outer layers of glass composite with direction ±45 degree;

2. Herex core of the composite sandwich;

3. Inner layers of thin Kevlar with direction ±45 degree;

4.  ;

5. 13 mm wide spar of high strength IMS65 carbon fiber;

6. Rohacell flap core;

7. Трубчатый лонжерон закрылка из карбонового чулка несёт крутящие нагрузки;

8. Strip of the hinge material;

9. The rear wall of the wing is of Rohacell with Carboline SC_39_2/45.

Fuselage

The new fuselage of Supra Expert satisfies a number of contradictory requirements:

• The glider does not slide after landing but stops as soon as the nose touches the ground. The shape of the pod tip satisfies F3J requirements;

• The fuselage has minimal aerodynamic drag, thanks to the wing raised on a pylon and streamlined pod outline with CFD optimized cross-sections;

• The shape of the fuselage also ensures increased stiffness and strength, required for violent landings.

The fuselage of Supra Expert is optimized for the ease of the radio equipment installation and maintenance. The servos are installed on a removable tray, which permits easy access to the receiver and the battery.

The fuselage of the Electric version is described at electric page.

Tail boom

Tow hook

Our trademark adjustable tow hook allows for launch optimization for any weather or C.G. location in the recommended range.

Canopy

The canopy is molded carbon composite. It uses reliable mounting latch design proven in many Vladimir’s Model planes: Blaster 2 El, Sprite, Graphite 2 El, Supra El, Supra Pro, Supra Pro El,Maxa.

Supra Expert tail