defeating gravity

  • cederic duss f3k eurotour champion

    Congratulations to Cederic Duss (SUI) – winner of F3K World Cup and CONTEST Eurotour 2017

  • joe wurts plus f5j new2
  • dominik prestele f3j eurotour champion

    Congratulations to Dominik Prestele (GER) - F3J CONTEST Eurotour winner 2017

  • shinto col de tende fai eurotour

       Congratulations to Sebastien Lanes (Shinto) - winner of the Col de Tende FAI eurotour and Pierre Rondel (Shinto) with 3rd place!

items
0
0
add to cart

shinto logo electro

  You can download a PDF file with our recommendations for installation LDS set in fuselage Shinto

pdflogo Shinto fuselage installation with LDS set

pdflogo Urs Leodolter's assembly recommendation for Shinto

 

You have chosen the model: 

Wing top
Wing bottom
Wing tips
Logos
Top of tail
Bottom of tail
Fuselage top
Fuselage bottom
Preinstalled servoframes
without servoframes
RDS MKS DS6125 SET
RDS KST DS125MG SET
** - black for the details of the Carboline is the color of natural carbon.

mail preview save
   
Add to cart
Delivery by courier service delivering EMS. All models are carefully packed in soft packaging film, and then packed in a robust plywood boxes. Estimated cost of delivery can watch  here

detalis_kit_shinto

Contents of part kit:

  1. Fuselage;

  2. Right stabilizer;

  3. Left wing tip;

  4. Left stabilizer;

  5. Fuselage servo tray;

  6. Wing joiner;

  7. Contest of accessoires Shinto kit;

  8. Right wing tip.

Recommended equipment not included to the kit


  1. Servos:

    MKS DS6125 mini or JR 285 MG - 2 pcs, in fuselage;

    KST DS135MG - 4 pcs, in wing

  2. Recivers:

    Spectrum AR9000 (JR R921);

    Futaba 6008HS;Weatronic Micro 8 Dual Receiver 2.4 Dual FHSS.

Glider bag 1620 mm blue

Glider bag 1620 mm blue

This bag, we recommend the use of models such as Maxa, Supra (all version), Super AVA PRO, Super AVA PRO 4 flap
Buy 83,00 €
Glider bag 1620 mm red

Glider bag 1620 mm red

This bag, we recommend the use of models such as Maxa, Supra (all version), Super AVA PRO, Super AVA PRO 4 flap
Buy 83,00 €
SHINTO B/F Ballast SHINTO B/F Ballast
Wing ballast set. You can insert up to 6 five ballasts to each console. Weight of each ballast part - 155g. Wing joiner has additional ballast cameras for mounting 670 g of the ballast. Maximum weight (weight of SHINTO B/F Ballast set) - 2530 g.
more info Buy 60,00 €
SHINTO J Ballast SHINTO J Ballast
Ballast for Shinto J is designed to use the glider to fly in thermals at different wind speeds. Wing joiner has additional ballast cameras for mounting 670 g of the ballast.
more info Buy 20,00 €
SHINTO Protection Bag set

SHINTO Protection Bag set

SHINTO bag
Buy 74,40 €
SHINTO  Fuselage Bag

SHINTO Fuselage Bag

SHINTO Fuselage Bag
Buy 37,20 €
SHINTO Silver Stabilizer Bag

SHINTO Silver Stabilizer Bag

SHINTO Silver Stabilizer Bag
Buy 14,88 €
SHINTO Silver Wing Bag

SHINTO Silver Wing Bag

SHINTO Silver Wing Bag
Buy 29,76 €
SHINTO Joiner HM

SHINTO Joiner HM

SHINTO High module Wing Joiner
Buy 90,00 €
Installation of IDS (per servo) Installation of IDS (per servo)
You can order IDS servo frame installation for flap and aileron servos for 5 EUR only
Buy 5,00 €
SHINTO IDS Type 11 B Lager for flaps (2 set) SHINTO IDS Type 11 B Lager for flaps (2 set)
Shinto IDS Type 11 B Lager for flaps set consists of: servoframe IDS Type 11 B Lager - 2pcs; different sizes horn set for servo - 2 pcs; rods for the flaps (length 62 mm) - 2 pcs; screws for fix the servo to the frame - 4 pcs; ball bearings - 2 pcs; shaft D=1 mm for connection to the flap horn - 2 pcs; shaft D=1.5 mm for connection to the servo horn - 2 pcs; flap horn (with 1 mm hole)- 2pcs; carbon cap strip for servo fixing to the wing bottom surface – 2 pcs. Compartible with servo: Graupner DS 3288, JR DS 171, JR DS 179 HV, JR DS 189 HV, JR DS 378, JR DS 398. Weight of each servo set 20.8 gr.


lds install instruction04lds install instruction05lds install instruction15lds install instruction57shinto flap kinematicpdflogo

more info Buy 30,00 €
SHINTO IDS Type 11 B Lager for ailerons (2 set) SHINTO IDS Type 11 B Lager for ailerons (2 set)
Shinto IDS Type 11 B Lager for ailerons set consists of: servoframe IDS Type 11 B Lager - 2pcs; servo horns JR - 2 pcs; rods for the ailerons (length 58 mm) - 2 pcs; screws for fix the servo to the frame - 4 pcs; ball bearings - 2 pcs; shaft D=1 mm for connection to the aileron horn - 2 pcs; shaft D=1 mm for connection to the servo horn - 2 pcs; aileron horn (with 1 mm hole)- 2pcs; carbon cap strip for servo fixing to the wing bottom surface – 2 pcs. Compartible with servo: Graupner DS 3288, JR DS 171, JR DS 179 HV, JR DS 189 HV, JR DS 378, JR DS 398. Weight of each servo set 20 gr.

lds install instruction04lds install instruction05lds install instruction15lds install instruction57shinto aileron kinematic

more info Buy 30,00 €
SHINTO IDS Type Robbe 3173 for flaps (2 set) SHINTO IDS Type Robbe 3173 for flaps (2 set)
Shinto IDS Type Robbe 3173 for flaps set consists of: servoframe IDS Type Robbe 3173 - 2pcs; servo horns Robbe S 3173 Svi разных размеров - 2 pcs; rods for the flaps (length 62 mm) - 2 pcs; screws for fix the servo to the frame - 4 pcs; ball bearings - 2 pcs; shaft D=1 mm for connection to the flap horn - 2 pcs; shaft D=1 mm for connection to the servo horn - 2 pcs; flap horn с отверстием D= 1 mm - 2 sets; carbon cap strip for servo fixing to the wing bottom surface – 2 pcs. Weight of each servo set: 20.8 gr.


lds install instruction04lds install instruction05lds install instruction15lds install instruction57shinto flap kinematicpdflogo

more info Buy 30,00 €
SHINTO IDS Type Robbe 3173 for ailerons (2 set) SHINTO IDS Type Robbe 3173 for ailerons (2 set)
Shinto IDS Type Robbe 3173 for ailerons set consists of: servoframe IDS Type Robbe 3173 - 2pcs; servo horns Robbe S 3173 Svi - 2 pcs; rods for the ailerons (length 58 mm) - 2 pcs; screws for fix the servo to the frame - 4 pcs; ball bearings - 2 pcs; shaft D=1 mm for connection to the aileron horn - 2 pcs; shaft D=1 mm for connection to the servo horn - 2 pcs; aileron horn (with 1 mm hole) - 2 а; carbon cap strip for servo fixing to the wing bottom surface – 2 pcs. Weight of each servo set: 20.5 gr.

lds install instruction04lds install instruction05lds install instruction15lds install instruction57shinto aileron kinematic

more info Buy 30,00 €

Shinto El Family Technical Data

 

 Click on the model name to paint it

SHINTO B EL LDS

SHINTO F EL LDS SHINTO J EL LDS

Length

1471 mm (57.9")

Wing span

2995 mm (117.9")

Wing area

 55.59 sq dm (sq in)

Wing air foils

М 164792S-Straak

Wing aspect ratio

16.14 %

Horizontal Tail area

 5,58 sq dm ( sq in)

Horizontal Tail aspect ratio

5,66 %

Tail air foils

M008

Control surfaces

ailerons, flaps, stabilizer

 

 

 

Weight characteristics Shinto El Family 

 

 

SHINTO B EL LDS

SHINTO F EL LDS SHINTO J EL LDS

Fuselage with nose ballast

 SHINTO B El Fuselage set

 gr

SHINTO F El Fuselage set 

 gr 

 SHINTO J El Fuselage set

Wing Tips ( both)

1210 gr (42,7 oz)

1280 gr (45,15 oz) 770 gr (27,2 oz)

Stabilizer

 SHINTO B Stabilizer

62 gr (2,19 oz)

SHINTO F Stabilizer

66 gr (2,33 oz)

SHINTO B Stabilizer

62 gr (2,19 oz)

Details like hatches, rods, screws, crevices

 

Wing joiner

SHINTO Joiner

117 gr (4,13 oz)

NT model weight

 

Flight weight *

1950 gr

 

2050 gr   gr 

Wing loading *

35.07 gr\dm² 

 36.88 gr\dm²  gr\dm² 

 

 

Price, EUR

Shinto B El LDS

2 145,00 € Buy

Shinto F El LDS

2 205,00 € Buy

Shinto J El LDS

1 918,00 € Buy

Shinto B El RDS

2 145,00 € Buy

Shinto F El RDS

2 205,00 € Buy

Shinto J El RDS

1 918,00 € Buy

 

 

* - typical value shown; the actual values depend on the radio gear used;

** - weight of the components depends on the color and the presence of stripes. Dark colors lighter, yellow is the heaviest.

 

 

shinto electro drawing 300dpi

f3b f3f wing_construction_shinto new

shinto j

Shinto B/F wing construction

  1. Outer layer of Carboline 75 2/45 with D-box reinforced on the front part;

  2. The wing back shear web;

  3. The inner layer

    Carboline 39 2/45- B version;

    Carboline 75 2/45- F version;

  4. The flap hinge;

  5. The flap shear web;

  6. The sandwich material;

  7. The spar bottom cap of high modulus carbon fiber;

  8. The spar top cap of high modulus carbon fiber;

  9. High-strength epoxy glue for the sparr;

  10. Main spar shear web of balsa plywood with direction ±45 degree;

  11. Main spar shear web of Carboline 39 2/45;

  12. The wing ballast box.

    Shinto J wing

    Shinto J has no ballast pocket in the wing. 550 g of the ballast can be placed in the wing joiner only.

Difference between Shinto LDS & RDS wings

 

 

shinto rds vs ids wings compare

For make Shinto order you must choice Shinto LDS or Shinto RDS version because:

  1. Different servo pocket size and orientation in RDS and LDS wing version;

  2. Brass bearings for flap RDS shaft Ø5mm has glued into wing already;

  3. Brass bearings for aileron RDS shaft Ø4.5mm has glued into wing already;

  4. Carbon RDS pockets has integrated to flaps and ailerons already (for 3 mm RDS shafts) ;

  5. Pockets for horns installation has prepared in flaps and aileron already for LDS version. 

We can install RDS system to Shinto wing for: MKS 6126 mini and KST 135 servos.

We can install LDS systems to Shinto wings for servos: Futaba S 3173 SVi ; JR (Graupner DS 3288, JR DS 171, JR DS 179 HV, JR DS 189 HV, JR DS 378, JR DS 398).

f3b f3f shinto wing joiner construction new2

 

Shinto B/F wing joiner

  1. Joiner caps of high modulus carbon fiber (for F3B) and high-strength carbon (for F3F);

  2. Joiner shear web with ballast box of carbon braids;

  3. Joiner vertical caps of high-strength carbon perceive shock during landing.

Shinto wing joiner is made of carbon prepreg in the steel mold with high pressure and temperature 130C.

Wing joiner weighs 117 grams. Wing joiner has additional ballast cameras for mounting 670 g of the ballast.

fuselage shinto electro 

Tail boom structureF3B F3F Shinto tail horns 2F3B F3F Shinto tail horns 7

Shinto Fuselage

Shinto fuselage is laminated in aluminum mold using pressure balloon.

The forward part is made of Kevlar and high modulus glass. It is 2,4Ghz friendly. The rear part is laminated of high modulus carbon fiber.

 

 

 

 

 



Shinto fuselage tail part construction

  1. Outer and inner layers of Carboline 65 2/45 perceive the torsional loads of the V-tail;

  2. Outer and inner layers of Carboline 65 2/45 perceive the torsional loads of the V-tail;

  3. The longitudinal layers of high modulus carbon fiber provide high stiffness of the fuselage.

V-tail horn hatch of carbon is ready completely. It is necessary to fix it by adhesive tape on the fuselage.

The semitransparent Shinto canopy is made of plastic. The logo of Shinto and VM is not just sparkling in the sun, but it is the reinforcement rib also. The ribs provide secure fit of the canopy to the fuselage by the clips.

Shinto and Shinto fuselage set are equipped with nose ballast. Weight of nose ballast is about 100g.

 

F3B F3F Shinto v tail hatch 3F3B F3F Shinto canopy 2

F3B F3F Shinto tail 3F3B F3F Shinto tail 5

 

Shinto V-tail

Shinto V-tail is made as sandwich construction. The stabilizers are fitted to fuselage completely and the elevator horns are installed.

Stabilizers must be secured with tape on the fuselage after assembly.

shinto el 1shinto el 2
f3j_f5j_f3f_shinto_technologies   shinto f3b f3f f3j drawing 72dpi   colors
             

          Advanced technologies                   Technical data                         Flexibe color scheme


simon thornton shinto f3b

 

 

 

 

"It is a fantastic model. The flying qualities make it very easy to fly. It has now proven itself in very strong winds, gusting to 30m/s, as well as light winds of only 3m/s on small slopes. " 

 Simon Thornton/ENG