Contents of accessories kit

1 - Flap pushrods (with M2 thread);

2 - Aileron pushrods (with M2 thread);

3 – Wing joiners;

4 – Rudder control horn;

5 – Wing and ballast mounting screws М4 (with three spare);

6 – Wrench for screws;

7 – Aileron, flap and tail clevises (with M2 thread);

8 - Aileron control horns;

9 - Rudder pushrod;

10 - Stabilizer pushrod with adapter;

There are three kinds of servo:

11,13,14 - Flat servo haches;

12 - Servo hatch Fix;

15 - Wing servo hatches with fairings for bigger servo horns;

16 - Wing servo hatches with fairings for bigger to the tail servos.

Contents of part kit:

1 - Right wing tip;

2 - Left wing tip;

3 - Central panel;

4 - Vertical stabilizer;

5 - Stabilizer;

6 - Tail boom;

7 - Ballast pipe;

8 - Fuselage;

9 - Wing servo hatches with fairings for bigger servo horns;;

10 - Contents of Maxa kit;

11 - Wing servo hatches with fairings for bigger to the tail servos.

Contents of accessories kit

1 –  Flap pushrods (with M2 thread);
2 – Aileron pushrods (with M2 thread);
3 – Wing joiners;
4 – Rudder control horn;
5 – Wing and ballast mounting screws М4 (with three spare);
6 – Wrench for screws;
7 – Aileron, flap and tail clevises (with M2 thread);
8 – Fuselage servo tray;
9 – Couplers M2 for carbon rod;
10 – Flat wing servo hatches;
11 – Aileron control horns;
12 – Wing servo hatches with fairings for bigger servo horns;
13 – Wires for connect the receiver to the wing connectors.

Contents of part kit:

1 - Right wing tip;
2 - Left wing tip;
3 - Central panel;
4 - Vertical stabilizer;
5 - Stabilizer;
6 - Tail boom;
7 - Ballast pipe;
8 - Fuselage;
9 - Wing servo hatches with fairings for bigger servo horns;
10 - Contents of Maxa kit;

Maxa 3.5m and Maxa 4m Windy central wing section

1 – Outer layers of our carbon spread tow laid at -45°;+45°;0° degree bias. There are also additional lengthwise gain of Spread Tow Carbon (Carboline).  There ara two layers of Carboline laid at -45°;+45° degree bias on the flaps;
2 – Herex core of the composite sandwich;
 3 – Inner layers of our carbon spread tow laid at -45°;+45°;0° degree bias;
 4 – Spar flanges from high strength IMS65 carbon fiber, 15 mm wide;
5 – Rohacell flap core;
6 – The front wall of the aileron is made of balsa plywood covered with glass fabric. This design reduces the weight of the control surface, while its height together with Spread Tow outer layers results in unsurpassed torsional stiffness;
 7 – Strip of the hinge material;
 8 – The rear wall of the wing from balsa plywood and fiberglass.

Maxa 3.5m and Maxa 4m Light central wing section

1 – Outer layers of our carbon spread tow laid at ±30 degree bias. Such layup results in high torsional stiffness and, at the same time, works in bending together with the spar.  Outer Spread Tow layers improve the wing durability;
2 – Herex core of the composite sandwich;
 3 – Inner layers of  our carbon spread tow laid at ±30 degree bias;
4 – Spar flanges from high strength IMS65 carbon fiber, 11.5 mm wide;
5 – Rohacell flap core;
6 – The front wall of the aileron is made of balsa plywood covered with glass fabric. This design reduces the weight of the control surface, while its height together with Spread Tow outer layers results in unsurpassed torsional stiffness;
 7 – Strip of the hinge material;
 8 – The rear wall of the wing from balsa plywood and fiberglass.

Servos in the fuselage Maxa EL 4m F5j Long tail mounted in a horizontal position. This opens the exclusive access to the battery, motor and receiver (See instructions on the tab “manual”). Ballast tube isn't glued, but is included.

Tail boom

The Tail Boom is made from thin carbon Spread Tow laid at +45 degree (1) and -45 degree (2) bias.  Between the Spread Tow layers, there are 2 layers  of unidirectional high strength carbon fiber (3).  This design yields stronger, stiffer, and more thermal stable tail boom, which weighs only 41 gram without pushrods.

Canopy

Canopy is made of carbon composite. . It uses reliable mounting latch design proven in many Vladimir’s Model planes: Supra PRO, Supra Electric, Blaster 2 Electric, Sprite, Graphite 2 Electric.